For Your Reclaimed/Rustic Flooring, We Are Proud To Offer Pioneer Millworks Flooring
Reclaimed Boardroom Maple Flooring

Reclaimed Maple Flooring
American Gothic
3/4" Thick Solid Wood Flooring
Tongue and Groove
Random length planks
Reclaimed Boardroom Maple Flooring shown with water based finish
3/4" Thick Solid Wood Flooring
Tongue and Groove
Random length planks
Reclaimed from a working factory, our Boardroom Maple is lightly planed to reveal striking contrast and patina, while removing the majority of the old finish. Both Boardroom and Foundry Maple are a little trickier to install than our other floors as the tongues & grooves were milled by long-departed workers in factories that have passed into history. We think the finished results are well worth it and a great way to add a little history to your project.
Reclaimed Foundry Maple
3/4" Thick Solid Wood Flooring, 3 1/4" Board Width Only,
Tongue and Groove
Random length planks
"As Found Flooring"
Reclaimed from a working factory, our Foundry Maple is a real factory floor that has been taken up, dusted off and made ready for your project. As such, it shows the kind of honorable scars and marks you might expect from a life of service in a cotton mill, aircraft factory or pressing plant.
Reclaimed Foundry Maple
3/4" Thick Solid Wood Flooring, 3 1/4" Board Width Only,
Tongue and Groove
Random length planks
"As Found Flooring"
Reclaimed from a working factory, our Foundry Maple is a real factory floor that has been taken up, dusted off and made ready for your project. As such, it shows the kind of honorable scars and marks you might expect from a life of service in a cotton mill, aircraft factory or pressing plant.
Flooring Price American Gothic Maple:
3" - 5" Mixed Width $9.50 per Square Foot
5" - 7" Mixed Width $10,70 per Square Foot
7" - 10" Mixed Width $12.85 per Square Foot
Call or Email for a quote on orders over 1000 square feet.
Reclaimed Boardroom Maple Flooring Price
3 1/4" Width $6.05 per Square Foot
Reclaimed Foundry Maple Flooring Price
3 1/4" Width $6.05 per Square Foot
Call or Email for a quote on orders over 1000 square feet.
Specifications:
RECLAIMED AMERICAN HARDWOODS - AMERICAN GOTHIC
Reclaimed Oak, Red Oak**, White Oak**, Hickory, Beech, Grey Elm, Maple,
Chestnut, Red Elm, Cherry, Ash, Walnut & Autumn Woods
DENSITY:
No limit on grain density
HEARTWOOD:
No limit on combination of heartwood and sapwood
GRAIN:
A mixture of at-sawn and vertical grain
COLOR:
No restriction on natural color variation
KNOTS:
No limitation on sound knots. Surface defects resulting from
chipped or broken knots will be present.
TEXTURE:
Re-sawing and milling removes all but infrequent saw marks
and previous wear patterns.
DISCOLORATION:
Ferrous staining from previous fasteners may be present.
LENGTHS:
2' - 12' is standard, 5' - 7' average
HOLES:
Nail and other mechanical holes can be present and occasionally
reach 3/8" in diameter. Surface defects from insect tracks and pin holes
will be present at times in heavy concentrations.
CHECKS:
Checks and crack allowed to 3/32" in widths less than 7".
In widths 7" and wider these sizes increase.
* Grading applies to flooring and boardstock, all material graded best face.
**This specication guarantees 90% of the called specie with an allowance of up to 10% of the other specie.
POST-INDUSTRIAL - BOARDROOM MAPLE
DENSITY:
No restriction on grain density
HEARTWOOD:
Unlimited combination of heartwood and sapwood
GRAIN:
No restriction on grain orientation
COLOR:
Unlimited color variations usually ranging from creamy white to
pink to light brown
KNOTS:
Unlimited knots, but usually very few
TEXTURE:
This product has been surfaced planed to remove most of the
patina, while the dents, scratches and wear marks from the woods
previous life, adding character to the oor
DISCOLORATION:
Often the wood has been stained in its previous life to create a
signicant and varied patina
LENGTHS:
18'' and longer, with lengths varying from each source
HOLES:
Infrequent holes may be present, usually nail holes--occasionally the
nails remain in the wood
CHECKS:
Some check and cracks from removing the oor may be allowed if the
board will hold together for installation
OTHER INFORMATION:
Boardroom Maple is brushed on the face to remove most of the
dirt, debris and patina while some debris remains on the tongue
and the boards may not t tight when nailed down recreating the look
of the old oor with gaps between the boards.
More time and care will be needed to install a boardroom maple oor.
Portions of the tongue and groove may be broken, this is allowed as long
as there is enough T&G to install the oor. These factors should be
considered when determining the installed cost of the oor
POST-INDUSTRIAL - FOUNDRY MAPLE
DENSITY: No restriction on grain density
HEARTWOOD:
Unlimited combination of heartwood and sapwood
GRAIN:
No restriction on grain orientation
COLOR:
Unlimited color variation usually a warm brown to very dark brown,
containing signicant and varied patina from the oor’s previous life
KNOTS:
Unlimited knots, but usually very few
TEXTURE:
Texture has been created from the oor’s previous life and may include
dents, scratches and wear marks
DISCOLORATION:
Surface has been stained by dirt, oils and debris to create a signicant
and varied patina
LENGTHS:
18'' and longer, with lengths varying from each source
HOLES:
Infrequent holes may be present, usually nail holes--occasionally the
nails remain in the wood
CHECKS:
Some check and cracks from removing the oor may be allowed if the
board will hold together for installation
OTHER INFORMATION:
Foundry Maple is brushed to remove most of the dirt and debris and
reveal the patina while some of the debris remains on the tongue and the
boards may not t tight when nailed down recreating the look of the old
oor with gaps between the boards.
More time and care will be needed to install a foundry maple oor.
Portions of the tongue and groove may be broken, this is allowed as long
as there is enough T&G to install the oor. These factors should be
considered when determining the installed cost of the oor
Shipping
Your flooring will be shipped directly to your building site, the shipping is shopped for an affordable shipping rate to save you money. We do not add any markup or handling fees to the shipping cost. We will provide you with a shipping quote prior to placing your order.
No Sales Tax
Montana does not have a sales tax, so we do not collect any sales tax. If your state requires you to pay a sales tax on products ordered out of state, it is your responsibility to pay your home state (if required)
Payments
We accept checks, money orders, Pay Pal, and charge cards. We offer a small discount for checks/cash payments.

Need More Information, or Ready to Buy?
Check out our reclaimed flooring products, e-mail us, or call: 406-253-7876.
We have additional pictures, specification sheets, samples, and warranty information available upon request. A fee may apply for some samples.
Email Us Now!